A Critical Analysis of the Characterization of Scroll Compressors Mass Flowrate
Jose M. Corberan, Prof., Javier Marchante-Avellaneda, Eng., Emilio Navarro-Peris, Prof., Som S. Shrestha, Dr. |
Rotary, scroll, screw compressors 1 |
Algorithm-based optimization for energy-efficient operation of refrigeration systems
Jörg Bentz, M.Sc., Christian Schweigler, Prof. Dr. |
Refrigerants and technologies |
Analysis Of Real Gas Equation Of State For 3D Cfd Modelling Of Twin Screw Expanders
Sham Rane, PhD, Ahmed Kovačević, PhD, Matthew Read, PhD, Nikola Stošić, PhD |
Rotary, scroll, screw compressors 1 |
Application Of Numerical Modelling For Estimation Of Geometry Of Ejector Applied In Motor Yachts Air-Conditioning System
Kamil Smierciew, PhD, DSc, Dariusz Butrymowicz, Prof., Jerzy Gagan, PhD |
Ejectors and centrifugal compressors 2 |
Characterization methodology for vapor injection scroll compressors of variable speed
Emilio Navarro-Peris, Prof., Jose M. Corberan, Prof., Fernando M. Tello-Oquendo, Dr. Eng., Daniela C. Vásconez-Núñez, Dr. Eng. |
Rotary, scroll, screw compressors 1 |
Closing speech
Dariusz Butrymowicz, Prof. Ing. PhD. |
Closing of the conference |
Comparative study of R744 ejector CFD models
Knut Emil Ringstad, Armin Hafner |
Technologies with CO2, ammonia and hydrocarbons |
Compressor Muffler Design Considering Fluid-Structure Interaction
Paulo Martins, Eric Murakami, MSc, Rafael Veloso, MSc |
Reciprocating compressors 2 |
Conference background and program
Peter Tomlein, Doc. Ing. PhD. |
Plenary Session |
Cylinder Deformation Sensitivity Study Using Fea
Mattias Castro, Denis Nikitin |
Reciprocating compressors 1 |
Design Principles For Centrifugal Compressor Diffusers Based On The Use Of Velocity Distribution
Andrii Lazarenko, student, Mykola Kalinkevych, PhD, prof., Mykola Radchenko, Dr., prof. |
Ejectors and centrifugal compressors 1 |
Efficiency of a Vacuum Cooling System with Liquid-Vapor Ejector for Biodiesel Production
Serhii Sharapov, PhD, Maxim Prokopov, PhD, Dariusz Butrymowicz, Dr hab., Viktor Kozin, PhD |
Ejectors and centrifugal compressors 1 |
Efficiency of refrigeration plants operation taking into account ambient temperature changing
Victor Shishov, PhD, Maxim Talyzin, PhD |
Refrigerants and technologies |
Evaluating of refrigerants using a dynamic reciprocating compressor model
Stephan Göbel, M.Sc., Dirk Müller, Dr.-Ing., Markus Nürenberg, M.Sc., Valerius Venzik, Dr.-Ing., Christian Vering, M.Sc. |
Reciprocating compressors 1 |
Experimental Investigation Of Fully Passive Thermally Driven Two-Phase Injector Pump
Andrzej Pawluczuk, M.Sc, , Dariusz Butrymowicz, Prof., Kamil Smierciew, PhD DSc, Jerzy Gagan, PhD |
Ejectors and centrifugal compressors 2 |
Experimental Investigations Of Heat Transfer In Packed Bed Of Carrot
Adam Łapiński, M.Sc., Dariusz Butrymowicz, Prof. |
Ejectors and centrifugal compressors 2 |
Field Measurement On Rooftop Condensing Unit Before And After Reconstruction
Peter Tomlein, Doc. Ing.PhD. |
Field measurements |
Field measurements and analysis of supermarket refrigeration low temperature units
Ivan Konstantinov, Post graduate teacher, Mykhailo Khmelniuk, DSc., Professor, Waleriy Wozniy, Phd., Ass. Professor |
Field measurements |
HFCs Phase-Down: New International and National Challenges
Didier Coulomb |
Plenary Session |
Improving the efficiency of gas turbine by using aerothermopressor for intercooling cyclic air
Halina Kobalava, Dmytro Konovalov, Ph.D., Mykola Radchenko, D.Sc., Roman Radchenko, Ph.D., Vyacheslav Sviridov, Ph.D. |
Ejectors and centrifugal compressors 1 |
Influence Of Compressor Speed Fluctuation On Bearings Design
Mattias Castro, Miha Gulic, Eric Murakami, Blaz Terlevic |
Reciprocating compressors 1 |
Influence of refrigerant and compressor construction forms on efficiencies assessed by dynamic simulation models
Christian Vering, Christian Schwenzer, Stephan Göbel, Valerius Venzik, Markus Nürenberg, Dirk Müller |
Rotary, scroll, screw compressors 1 |
Injector refrigerant circulation for enhancing heat efficiency of air coolers with uneven heat load distribution
Mykola Radchenko, D.Sc, Andrii Radchenko, Ph.D, Dariusz Mikielewicz, D.Sc, Veniamin Tkachenko, Oleksii Zielikov |
Ejectors and centrifugal compressors 1 |
Liquid Slugging in Reciprocating Compressor
Ján Tuhovčák, Eric Murakami, Ján Bossányi |
Reciprocating compressors 1 |
Method of household compression refrigeration devices energy perfection determination and mathematical model of its estimation
Yurii Baidak, DSc,Professor, Iryna Vereitina, PhD,Ass.Professor |
Reciprocating compressors 2 |
Modeling Approach for a Liquid-Injected Ammonia-Water Screw Compressor
Marcel Ulrich Ahrens, M.Sc, Even Kristian Tønsberg, Ignat Tolstorebrov, Dr., Armin Hafner, Prof., Trygve Magne Eikevik, Prof. |
Technologies with CO2, ammonia and hydrocarbons |
Modelling the Dynamics of Ring Plate Valves in Reciprocating Compressors Using Coupled CFD-FEM Simulations
Åsmund Ervik, Dr., Afaf Saai, Dr., Torodd Berstad, Dr., Ole Meyer, Dr., Tatusya Oku, Dr., Takuma Tsuji, Dr., Kazuhiro Hattori, Dr., Kazuya Yamada, Dr., Virgile Delhaye, Dr., Petter Nekså, Dr. |
Reciprocating compressors 2 |
New Flammable Refrigerant Charge Limit In Commercial Refrigeration
Marek Zgliczynski |
Plenary Session |
Numerical Analysis of the Transient Compressible Fluid Flow in the Piston-Cylinder Clearance of an Oil-Free Linear Compressor
Thiago Dutra, Ph.D., Claudio J Santos, M.Sc., Cesar J Deschamps, Ph.D. |
Reciprocating compressors 2 |
Numerical design and operation of the ejection refrigeration system driven by low-grade heat
Kamil Śmierciew, PhD, DSc, Dariusz Butrymowicz, Prof., Jerzy Gagan, PhD, Mikolaj Mastrowski, MSc, Marek J. Bergander, Prof. |
Ejectors and centrifugal compressors 2 |
Optimization of transport characteristics of ice slurry flows in horizontal pipe
Souheila mellari |
Refrigerants and technologies |
Performance of integrated R744-packs Part 1 - Compressor mass flow estimation based on data driven models using analytical methods and actual field measurement
Vahid Khorshidi, MSc., Ekaterini Kriezi, PhD, Christian Schlemminger, Dr.Ing. / PhD, Engin Söylemez, PhD, Armin Hafner, Professor |
Field measurements |
Performance of integrated R744-packs Part2 - Ejectors performance, a comparison of onsite measurements and model predictions
Ekaterini Kriezi, PhD, Vahid Khorshidi, MSc., Christian Schlemminger, Dr.Ing. / PhD, Engin Söylemez, PhD, Armin Hafner, Professor |
Technologies with CO2, ammonia and hydrocarbons |
Process Simulation and Analysis of a Rotary -Vane Gas Refrigerating Machine for Cold Production in the Medium Temperatures Level
Volodymyr Trandafilov, Ph.D, Mykhailo Khmelniuk, Dr.Tech.Sc., Oleksii Ostapenko, Ph.D, Olga Yakovleva, Ph.D |
Rotary, scroll, screw compressors 1 |
Propylene Refrigerant For Commercial Applications
Jozef Sedliak, ing, Michal Minďaš, ing |
Technologies with CO2, ammonia and hydrocarbons |
Rational designing of ambient air conditioning systems of combined type
Andrii Radchenko, Ph.D, Mykola Radchenko, D.Sc, Eugeniy Trushliakov, Ph.D, Serhiy Kantor, Ph.D |
Refrigerants and technologies |
Safety in refrigeration, air-conditioning and heat pumps
Alexander Pachai |
Plenary Session |
Simulation and monitoring of a CO2 commercial refrigeration system serving a supermarket in Northern Italy
Marco Azzolin, Gianluca Cattelan, Corrado de Gioia-Carabellese, Silvia Minetto, Davide Del Col |
Field measurements |
Summary
Didier Coulomb |
Closing of the conference |
Thermodynamic Analysis Of Zeotropy Mixtures For Ejection Refrigeration Cycle
Paweł Jakonczuk, M.Sc., Kamil Smierciew, PhD, DSc, Dariusz Butrymowicz, Prof. |
Ejectors and centrifugal compressors 2 |
